Three (3) rows of articulating darts, 12 individually addressable RGB LEDs, sound effects, gesture-based firing, and fully customizable colors. Upgrade your costume to the next level of screen-accurate realism.

📦 What’s Included

• Software with firmware update support
• Bill of Materials for all Commercial Off-The-Shelf (COTS) components
• STL files for required 3D-printed parts
• Illustrated step-by-step build guide

⚠️Important: Digital Files ONLY - NO PHYISCIAL ITEM WILL BE SHIPPED

This kit is intended for makers and prop builders with experience in basic electronics and cosplay assembly. It requires soldering, fitting small components into a printed shell, and following a detailed build guide with step-by-step instructions, images, and videos.  Because this is a hobbyist kit for self-assembly, refunds for issues caused during the build process will not be provided.

• This kit does not include armor or bracer parts.
• Photos of a completed gauntlet are for demonstration only.
• Fit and finish may vary depending on your gauntlet model, print scale, and assembly.

🧩 Compatibility

Designed to fit inside most Mandalorian-style gauntlets with a minimum interior space of 100mm x 33mm.

Tested with:

• Chameleon FX
• Great Ape Studio Art
• Galactic Armory

(Gauntlet files are not included.)

🛠️ What you need: 3-6 hours to build

• Electronics & Soldering Skills – Assembly requires wiring components per the build guide.
• Basic Tools – Screwdrivers, flush cutters, heat shrink tubing, and common cosplay tools (full list provided).

Three (3) rows of articulating darts, 12 individually addressable RGB LEDs, sound effects, gesture-based firing, and fully customizable colors. Upgrade your costume to the next level of screen-accurate realism.

📦 What’s Included

• Software with firmware update support
• Bill of Materials for all Commercial Off-The-Shelf (COTS) components
• STL files for required 3D-printed parts
• Illustrated step-by-step build guide

COTS Components:

You’ll get everything needed to build a complete kit, all tested to fit the design.

• LED strip
• Fiber Optics
• Microcontroller
• Speaker
• Servo Motor
• Magnetic Switch
• Magnets
• Steel Bars
• Wire
• Power Switch
• Heat Shrink
• Velcro Strips

⚠️ Important DIY Note - Assembly Required!

This kit is intended for makers and prop builders with experience in basic electronics and cosplay assembly. It requires soldering, fitting small components into a printed shell, and following a detailed build guide with step-by-step instructions, images, and videos.  Because this is a hobbyist kit for self-assembly, refunds for issues caused during the build process will not be provided.

• This kit does not include armor or bracer parts.
• Photos of a completed gauntlet are for demonstration only.
• Fit and finish may vary depending on your gauntlet model, print scale, and assembly.

🧩 Compatibility

Designed to fit inside most Mandalorian-style gauntlets with a minimum interior space of 100mm x 33mm.

Tested with:

• Chameleon FX
• Great Ape Studio Art
• Galactic Armory

(Gauntlet files are not included.)

🛠️ What you need: 3-6 hours to build

• Electronics & Soldering Skills – Assembly requires wiring components per the build guide.
• Basic Tools – Screwdrivers, flush cutters, heat shrink tubing, and common cosplay tools (full list provided).

Three (3) rows of articulating darts, 12 individually addressable RGB LEDs, sound effects, gesture-based firing, and fully customizable colors. Upgrade your costume to the next level of screen-accurate realism.

📦 What’s Included

• Software with firmware update support
• Bill of Materials for all Commercial Off-The-Shelf (COTS) components
• STL files for required 3D-printed parts
• Illustrated step-by-step build guide

COTS Electronics Components:

• Full electronics kit: microcontroller, speaker, NeoPixels, servo, magnetic switch, and more

3D Printed Parts

• All 3D parts required for the kit, printed in PETG.

⚠️ Important DIY Note - Assembly Required!

This kit is intended for makers and prop builders with experience in basic electronics and cosplay assembly. It requires soldering, fitting small components into a printed shell, and following a detailed build guide with step-by-step instructions, images, and videos.  Because this is a hobbyist kit for self-assembly, refunds for issues caused during the build process will not be provided.

• This kit does not include armor or bracer parts.
• Photos of a completed gauntlet are for demonstration only.
• Fit and finish may vary depending on your gauntlet model, print scale, and assembly.

🧩 Compatibility

Designed to fit inside most Mandalorian-style gauntlets with a minimum interior space of 100mm x 33mm.

Tested with:

• Chameleon FX
• Great Ape Studio Art
• Galactic Armory

(Gauntlet files are not included.)

🛠️ What you need: 3-6 hours to build

• Electronics & Soldering Skills – Assembly requires wiring components per the build guide.
• Basic Tools – Screwdrivers, flush cutters, heat shrink tubing, and common cosplay tools (full list provided).

Three (3) rows of articulating darts, 12 individually addressable RGB LEDs, sound effects, gesture-based firing, and fully customizable colors. Upgrade your costume to the next level of screen-accurate realism.

📦 What’s Included

• Software with firmware update support
• Bill of Materials for all Commercial Off-The-Shelf (COTS) components
• STL files for required 3D-printed parts
• Illustrated step-by-step build guide

COTS Electronics Components:

• Full electronics kit: microcontroller, speaker, NeoPixels, servo, magnetic switch, and more

3D Printed Parts

• All 3D parts required for the kit, printed in PETG.

Beskar Dart Tips

• Printed with Resin
• Painted with show accurate Alumaluster
• Sealed with 2k clear

⚠️ Important DIY Note - Assembly Required!

This kit is intended for makers and prop builders with experience in basic electronics and cosplay assembly. It requires soldering, fitting small components into a printed shell, and following a detailed build guide with step-by-step instructions, images, and videos.  Because this is a hobbyist kit for self-assembly, refunds for issues caused during the build process will not be provided.

• This kit does not include armor or bracer parts.
• Photos of a completed gauntlet are for demonstration only.
• Fit and finish may vary depending on your gauntlet model, print scale, and assembly.

🧩 Compatibility

Designed to fit inside most Mandalorian-style gauntlets with a minimum interior space of 100mm x 33mm.

Tested with:

• Chameleon FX
• Great Ape Studio Art
• Galactic Armory

(Gauntlet files are not included.)

🛠️ What you need: 3-6 hours to build

• Electronics & Soldering Skills – Assembly requires wiring components per the build guide.
• Basic Tools – Screwdrivers, flush cutters, heat shrink tubing, and common cosplay tools (full list provided).